تایمر OMRON H3CA-FA
اندازه DIN (48 x 48، 45 x 75 mm) تایمر باتنظیمات دیجیتال و نمایشگر LCD• منبع تغذیه دوگانه برای AC/DC .• هشت حالت عملیات قابل انتخاب با یک واحد.• هر زمان دلخواه را می توان به صورت دیجیتالی در محدوده 0.1 ثانیه تا 9990 ساعت تنظیم کرد• چهار ورودی سیگنال خارجی.• نشانگر ON/OFF برای کنترل خروجی و نشانگر نوار برای زمان باقی مانده.• مطابق با علامت UL، CSA، و CE.
مشخصات
- شرکت سازنده :
- OMRON
- مدل :
- H3CA-FA
- کشور سازنده :
- ژاپن
فایلهای پیوست
| h3ca_ds_e_4_5_csm84 | 2٫62 مگابایت | دانلود |
| timer_replace_tg_e_1_1_csm1062339 | 43٫31 کیلوبایت | دانلود |
توضیحات محصول
45 mm x 75 mm x 100.9 mm, 24 to 240 VAC (50/60 Hz), 12 to 240 VDC, Time range (7 range), Output Time-limit contact: SPDT, Front screw terminals
| Rated supply voltage | 24 to 240 VAC (50/60 Hz) 12 to 240 VDC (Ripple 20% max. (Single-phase full-wave rectified power sources may be used for 24 to 240 VDC.)) |
|---|---|
| Operating voltage range | 90 to 110% of rated supply voltage (21.6 to 264 VAC/10.8 to 264 VDC) |
| Power consumption | Approx. 0.2 to 4 VA/Approx. 0.2 to 2 W |
| Time ranges（Number of ranges） | 7 |
| Time ranges | 0.1 to 99.9 s 1 to 999 s 0.1 to 99.9 min 1 to 999 min 0.1 to 99.9 h 1 to 999 h 10 to 9990 h |
| Input method | No-voltage input (open and short-circuit) |
| Output modes | A: ON delay B: Repeat cycle C: Signal ON/OFF delay D: Signal OFF delay E: Interval F: One shot and flicker G: Signal ON/OFF delay H: Signal OFF delay |
| Control output （Contact output） | Time-limit contact: SPDT Resistive load: 3 A at 250 VAC Minimum applicable load: 10 mA at 5 VDC (failure level: P Reference value) |
| Reset system | Self-reset/External reset |
| Power reset | Reset time: 0.5 s max. |
| Display method | LCD 3 digit |
| Ambient temperature (Operating) | -10 to 55 ℃ (with no icing) |
| Ambient humidity (Operating) | 35 to 85% |
| Accuracy of operating time | ±0.3% ±0.05 s (The values are based on the set value.) |
| Setting error | ±0.5% ±0.05 s (The values are based on the set value.) |
| Influence of voltage | ±0.3% ±0.05 s (The values are based on the set value.) |
| Influence of temperature | ±0.3% ±0.05 s (The values are based on the set value.) |
| Insulation resistance | 100 MΩ min. (at 500 VDC) |
| Dielectric strength | Between current carrying metal parts and non-current carrying metal parts: 2000 VAC 50/60 Hz 1 min Between control output terminals and operating circuit: 2000 VAC 50/60 Hz 1 min Between non-continuous contacts: 1000 VAC 50/60 Hz 1 min |
| Impulse withstand voltage | Between power terminals: 5 kV Between current carrying terminals and exposed non-current carrying metal parts: 5 kV |
| Vibration resistance | Destruction: 10 to 55 Hz, 0.75 mm single amplitude each in 3 directions for 1 hour Malfunction: 10 to 55 Hz, 0.5 mm single amplitude each in 3 directions for 10 min |
| Shock resistance | Destruction: 1,000 m/s2, 3 times each in 6 directions Malfunction: 100 m/s2, 3 times each in 6 directions |
| Life expectancy | Electrical: 100,000 operations min. (3 A at 250 VAC resistive load at 1800 operations/h) Mechanical: 10 million operations min. (under no load at 1,800 operations/h) |
| Degree of protection | IP40 |
| Mounting method | Surface mounting |
| External connection method | Front screw terminals |
| Weight | Approx. 190 g |
